Quantity:
Color:
Quantity:
Color:
With Tail Gear
Quantity:
Type:
Quantity:
Color:
Quantity:
Decal Color:
X-Gear /X-Fuse Color:
Slow Stick X™ - X-Trainer™ Upgrade "Short" Build Kit - New and improved -
easier to build and cover!
Kit can be built either as a Slow Stick X or an
X-Trainer
! Includes all laser-cut balsa and plywood parts needed to complete the
aerobatic wing/tail sections.
NEW! Now includes rubber band post extenders,
aileron push rods, control horns and CA hinges needed to complete the upgrade
from the GWS Slow Stick foam plane. Designed to easily replace the foam
wings/tail on a Slow Stick. Proudly made in the USA! (Requires a GWS Slow Stick
Electric ARF Park Flyer Airplane Kit or fuselage kit, covering and power pack).
Item #SSX XTBK2 Retail Price: $54.95
As seen on RC Groups, Ezonemag.com, Fly R/C and
Quiet Flyer (RC Sport Flyer) Magazine

The Slow Stick X™ was developed as an upgrade to the floppy foam
wings of the GWS Electric Slow Stick R/C Park Flyer. This new design
replaces the styrofoam wing and tail of the GWS Slow Stick with a more
robust balsa-constructed design, consisting of a fully symmetrical
aerobatic wing complete with ailerons, and a tail with rudder and
elevator.

Recommended Power Pack items: 400 style outrunner motor, 125-200
watts with 18-20 amp speed control, or equivalent; propeller and battery
(1100 - 2200 mAh 3-cell lipo) as recommended in instructions for motor;
4 sub-microservos, such as HS-55 or HS-65; receiver and transmitter.


Kit can be built either as a straight-wing Slow Stick X™ or a
dihedral-wing X-Trainer™!

See SSX & X-Trainer Accessories page for a variety of accessories!
Call us to check availability of power packs.

Maximum Flying Weight: 23 1/2 oz.
Wing Span: 42 x 12 in.
Wing Area: 504 sq. inches (3.5 sq. ft)
Wing Loading: 6.71 oz./ sq. ft.

Available as a "short" build kit or build kit bundle.


NEW!! Easier to build and cover laser-cut SSX build kit
is now available.
Assemble like a 3-D puzzle!

As if the original Slow Stick X™ aerobatic plane wasn't good enough, Millennium R/C
has launched a new, easier to build and cover version of its very popular Slow Stick
X™. This new version makes it even easier for novice builders to put together a
great-flying plane. James Karpy got his wheels turning again to come up with a design
that kept all the great flying characteristics of the original Slow Stick X™, but that
required less sanding and shaping than the original kit, and which simplified the
process of covering the wing. Some extras in the new design are the pre-cut slots for
the CA hinges (which are also now included in the new kit), the ability to control flight
even more by using four servos (which are now neatly tucked on the bottom of the
wing), a new stronger, more rigid tail section, as well as a better roll rate thanks to its
longer ailerons.
Slow Stick X ™
and X-Trainer ™
Check out our
RC Groups
Build Thread!

(new kit instructions
start on page 107 of the
build thread)
X-Gear™ - ABS Plastic/Nylon blend and Carbon fiber landing gear for more
stability and strength. Works with original GWS Slow Stick fuselage, Slow Stick
X
fuselage and also adaptable to many of the current E-Flite models. Available
in choice of colors: Black, Blue, Red, White, Yellow and new Green! Now includes
even stronger carbon rods! (DOES NOT INCLUDE WHEELS)
Item #XGII Retail Price: $14.95
NEW AND IMPROVED!! Outrunner motor mount - Our very own Made in the
USA Glass-filled ABS/Nylon blend outrunner motor mount. Provides a strong,
affordable and lightweight solution for mounting your outrunner motor to any 10mm
x 10mm stick. Works with a wide selection of outrunners and includes (4) 3mm x
4mm screws to easily mount the motor. Mounting holes are slotted to allow a fit for
a variety of motors. Internal diameter is 1.2 inches. Weighs only 5 grams.
Available in Black, Blue, Red or Yellow to match our X-Gear™ and X- Fuse™
Sets!
Item #MRCOMM Retail: $3.95
NEW!! X-Fuse™ Set - Includes our newly designed battery mount, servo mount,
adjustable pushrod guide, wing mounts, steerable tail / nose gear, 10mm square
fuselage joiner and hardware needed to complete. (choose with or without
steerable nose/tail gear) Available in Black, Blue, Red or Yellow! Individual parts
are available on the X-Fuse
page of our website.
Item #XFSTG $13.50 With Tail Gear
Item #-XFS $10.95 Without Tail Gear
SAVE $$
Slow Stick X™ - X-Trainer™ Complete Build Kit Bundle -
New and improved -
easier to build and cover!
Kit can be built either as a Slow Stick X or an
X-Trainer
! Includes everything in the "short" kit, as well as 10mm square carbon
fiber fuselage, our new X-Fuse
fuselage kit with steerable tail gear, X-Gear
landing gear , motor mount, wheels and decal. (Please specify decal, X-Fuse and
X-Gear color preference.).
Over a $100 value! (Requires covering and power pack)
Item #SSX XTBKB2 Retail Price: $89.95 (YELLOW DECAL CURRENTLY OUT
OF STOCK_
(Plans to bring back the SSX ARF in new exciting color combinations
are in the works. ARF not available until further notice. Contact us for
information on having a custom-built SSX made for you!)
Original Slow Stick X™
New Slow Stick X™ and X-Trainer™ from Millennium R/C
NEW!! Slow Stick X™ - X-Trainer™ Repair Kits (WOOD ONLY) You've asked for
it and here it is! Choose from either the wing repair kit or the tail repair kit. Includes
laser-cut balsa and ply to build either SSX or X-Trainer Wing, OR SSX / X-Trainer
tail section. These repair kits are of the new design. Hardware and instructions which
are included in "Short Kit" are not included in this repair kit (instructions may be
downloaded here).
Item #SSX XTRK-W (Wing)
Item #SSX XTRK-T (Tail)
Retail Price: Wing Repair Kit $32.00
Retail Price: Tail Repair Kit $16.00
QUALITY, INNOVATIVE SSX ACCESSORIES
MANUFACTURED IN THE USA BY MILLENNIUM R/C
Other items for the Slow Stick X or X-Trainer are
available on our SSX Accessories Page
New and Improved
Slow Stick X™
You may also link to our website with an easy-to-remember URL (Fly Electric R/C!): www.FlyERC.com